THIN-FILM SOLAR POWER
+ Specification
| Electrical Principle | |||
Superior |
Superior |
||
| Nominal Power (+/-10%) |
Pmpp(W) | 50W |
45W |
| Voltage at Pmax (+/-10%) |
Vmpp |
45.05V |
45.34V |
| Current at Pmax (+/-10%) |
Impp |
1.11A |
1.00A |
| Open Circuit Voltage (+/-10%) |
Voc(V) |
61.8V |
61.08V |
| Short Circuit Current (+/-10%) | Isc(A) | 1.44A |
1.28A |
| Temperature Coefficient | Pmax TK | -0.29%/¢XC |
|
| Voc TK | -0.35%/¢XC |
||
| Isc TK |
+0.09%/¢XC |
||
| Mechanical Principle & Component | |||
| Length |
1397+/-2.5mm |
||
| Width | 635 +/-2.5mm | ||
| Depth | 7 +/- 1mm (without Junction Box) 20 +/- 1mm (with Junction Box) |
||
| Weight |
15 +/- 1kg | ||
| Maximum System Voltage | 1000V |
||
| Output Cables | £X2.5mm double insulation / Length 450+/-5 mm | ||
| Connectors |
Cable with plug Connector (LEATEC£X4.0 mm) combine directly with (MC £X4.0mm) LEATEC Type 62-14240 and 62-24241 MC Type PV-KBT4 and PV-KST4 |
||
| Bypass Diode |
3 A,1000V | ||
| Cell Type | Amorphous Silicon |
||
| Frame Material | Frameless |
||
| Cover Type | 3.2mm front glass laminated to 3.2mm back glass | ||
| Encapsulation | EVA (Ethyl Vinyl Acetate) | ||
| Operating Temperature | -40 to +85¢XC |
||
| Warranty | |||
| Warranty | 20 years limited power output warranty | ||
| Product |
2 years limited workmanship or materials warranty | ||
Electrical specifications are rated at Standard Test Conditions STC ( Irradiance of 1000 W/m2, AM1.5, cell temperature 25¢J ) and PVUSA Test conditions PTC( Irradiance of 1000W/m2, AM 1.5,ambient temperature 20¢J,1m/s wind speed). During the stabilization process that occurs during the first few months in service, module power output will exceed specified ratings. Power output may be higher by 20%; operating voltage may be up to 10% higher; operating current may be up 14% higher; and short circuit current may be up to 10% higher.
